Flik Industries Inc: Product Page: Pneumatic Products

NLD Series Pneumatic No-Loss Drain Valves
NLD Series Drain Valves are fully automatic: no electricity is required. Their low profile gives you the advantage of installing in areas where the vessel to be drained is only in a few inches from the ground.	Please choose from the following: Models NLD24 and NLD24T Model NLD1 Models NLD8 and 21 Model NLD3 PDV Series Automatic Drain Valves Economy ADV Series Automatic Drain Valves MBV Motorized Series Drain Valves

Model NLD24 and NLD24T
Unique air valve design uses magnetic force to ensure both a positive opening and closing that will prevent any air loss- eliminates the need for the installation of a vent line in most applications. Innovative ball support and positioning system prevents the side loading problem which otherwise could cause premature sealing failure around the valve stem Non clogging ball valve ensures that rust and scale will exit no strainer is required Manual test button provides confirmation of valve operation (model NLD24-T only) See through vessel Low Profile - Compact Design Fully pneumatic Completely Self Contained Operates on Demand Non Clogging Ball Valve No waste, Air No Strainers to Clean
	back to top

Model NLD 1
Vent adapter prevents air locking and makes installation easy Long lever ensures the float will open the drain when required and provide a high closing pressure to prevent the valve seat from leaking Valve seat location prevents solid particulate from interfering with drain operation Manual valve allows drain to be cleaned without removing from service Lightweight design can be installed without mounting brackets
	back to top

Models NLD8 and 21
See through vessel provides visual assurance of operation Drain operates only when vessel is full of condensate Straight-through flow design passes rust and scale that would full other types of valves - no strainer to clean. Control stem is coated to ensure smooth, consistent cycling. Stainless steel float operates in both water and oil.
	back to top

Model NLD3
Internal strainer allows rust and scale to accumulate away from the discharge port Large interior reservoir holds many times more particles than ordinary strainers Easy to maintain and easy to service- piping does not have to be disconnected.
	back to top

PDV Series Automatic Drain Valves
Automatic Operation - requires no operator attention, avoids potential liquid carryover No floats of linkages- operation free from sticking or binding Oversized drains - quickly and easily drains liquid and sludge- Not subject to plugging Sealed solid state circuitry - dependable, maintenance-free, unattended operation Adjustable cycle time and drain time - minimizes compressed air losses associated with open bleeds Flexibility to accommodate a range of liquid loading Nema 4- installation in indoor and outdoor locations UL Listed- reliable operation Enclosure - meets or exceeds Nema 1, 3, 4, 12 and is suitable in lieu of NEMA 7 for Class Division 2 locations Electrical Connections- supplied with adaptor for either 1/2 conduit connection or customer-supplied cord and plug
	back to top

ADV Series Automatic Drain Valves
2 timing adjustments - most accurate performance Valve on/off indicator lights Manual push to test button Compact Size and lightweight Optional strainer available 6 ft. Power cord
	back to top

MBV Motorized Series Drain Valves
No operator attention needed Battery back-up - fails closed Anti-blockage feature with indicator Power on/off Valve open (rotating) LED indicator 6 ft. Power Cord Manual push to test Timer adjustment to match contaminant load No clogging Low energy use Handles heavy contaminants Broad range of application
	back to top




	MR. ERWIN N. BULATAO
	PRESIDENT / CEO
	"Coupled with The Company's 24/7 In-house and On-site services, My ultimate desire is to give you the best available solutions to fulfill and complete Your Company's needs for a Zero Operation down-time"